The Geek Vape L200, also known as the Aegis Legend 2, is a highly popular and durable vape device designed for both new and experienced vapers. With its rugged construction and advanced features, it has carved a niche for itself in the vaping community. This comprehensive manual will guide you through the essential aspects of the Geek Vape L200, including setup, usage, maintenance, troubleshooting, and safety tips to enhance your vaping experience.
1. Getting Started with the Geek Vape L200
Before diving into the functionalities of the Geek Vape L200, it is crucial to understand the components that come with the device and how to set it up properly.
1.1 What’s in the Box?
When you purchase the Geek Vape L200, you will typically find the following items in the package:
- Geek Vape L200 Mod
- Geek Vape Z Sub-Ohm Tank
- Replacement Glass Tube
- Coil (usually pre-installed)
- USB Type-C Charging Cable
- User Manual
- Warranty Card
1.2 Initial Setup
To set up your Geek Vape L200, follow these steps:
1. Charge the Device: Before first use, ensure that the device is fully charged. Connect the USB Type-C cable to the mod and a power source.
2. Install the Battery: Open the battery compartment located at the bottom of the device. Insert two 18650 batteries, ensuring that the positive and negative terminals are aligned correctly.
3. Fill the Tank: Unscrew the top cap of the Z Sub-Ohm Tank and fill it with your preferred e-liquid. Be sure not to overfill to avoid leakage.
4. Prime the Coil: If you are using a new coil, allow it to soak in e-liquid for at least 10 minutes to avoid burning it during initial use.
5. Assemble the Tank: Screw the tank back onto the mod firmly but not excessively.
2. Understanding the Features of the Geek Vape L200
The Geek Vape L200 comes equipped with several features that enhance its usability and performance.
2.1 Design and Build Quality
- Durability: The L200 is constructed with an IP67 rating, making it water and dust resistant. It can withstand immersion in water up to a certain depth for a limited time.
- Shockproof: The device is designed to endure drops and impacts, making it an excellent choice for outdoor enthusiasts.
- Ergonomic Design: The mod has a comfortable grip and is lightweight, allowing for ease of handling during use.
2.2 Display and Controls
- Screen: The L200 features a 2.0-inch TFT color display that clearly shows all important information, including battery life, wattage, resistance, and puff count.
- Buttons: The device has three buttons: the fire button, the plus (+) button, and the minus (-) button. The controls allow for easy navigation through settings and adjustments.
2.3 Modes of Operation
The Geek Vape L200 supports various modes to cater to different vaping preferences:
- Power Mode: The default mode, allowing you to adjust wattage from 5W to 200W.
- TC Mode: Temperature control mode for those who prefer to vape at specific temperatures.
- Bypass Mode: This mode allows the device to output voltage based on the battery level, similar to a mechanical mod.
3. Using the Geek Vape L200
Understanding how to operate the Geek Vape L200 is vital for a satisfying vaping experience.
3.1 Turning the Device On/Off
To turn the Geek Vape L200 on or off, press the fire button five times rapidly. The device will display a welcome message upon powering on.
3.2 Adjusting Wattage
1. Press the power button three times to enter the adjustment mode.
2. Use the plus (+) and minus (-) buttons to increase or decrease the wattage to your desired setting.
3. Press the fire button to confirm your selection.
3.3 Switching Between Modes
To switch between modes:
1. Press the fire button three times.
2. Navigate through the available modes using the plus (+) or minus (-) buttons.
3. Select your preferred mode by pressing the fire button.
3.4 Locking/Unlocking the Device
To prevent accidental firing, you can lock your device:
- Press the fire button three times quickly to enter the menu.
- Use the plus (+) and minus (-) buttons to select the lock option.
- Confirm your selection with the fire button.
4. Maintenance and Care
Proper maintenance of your Geek Vape L200 ensures longevity and optimal performance.
4.1 Cleaning the Device
- Tank: Regularly clean the tank with warm water and mild soap. Rinse thoroughly and let it dry completely before refilling.
- Mod: Wipe the exterior of the mod with a soft, damp cloth to remove dust and residue.
4.2 Changing the Coil
1. Unscrew the tank from the mod.
2. Remove the base of the tank to access the coil.
3. Unscrew the old coil and replace it with a new one.
4. Reassemble the tank and refill with e-liquid.
5. Troubleshooting Common Issues
Even the best devices may encounter issues from time to time. Here are some common problems and their solutions:
5.1 Device Won't Turn On
- Ensure the batteries are installed correctly.
- Check if the batteries are charged.
- Try a different set of 18650 batteries.
5.2 Leaking Tank
- Ensure that the tank is assembled correctly.
- Check for cracks or damage in the glass.
- Ensure the coil is properly tightened and seated.
5.3 Poor Flavor or Vapor Production
- Prime the coil adequately before use.
- Ensure that you are using the correct wattage for the coil.
- Consider changing the coil if it's been used extensively.
6. Safety Tips
Using the Geek Vape L200 safely is crucial to preventing accidents and ensuring a positive experience. Here are some safety tips to keep in mind:
- Use Quality Batteries: Always use reputable brands of 18650 batteries.
- Store Safely: Keep your device in a cool, dry place when not in use.
- Avoid Overcharging: Disconnect the device once it's fully charged to prevent battery damage.
- Regular Inspections: Periodically check your device for any signs of wear or damage.
7. Conclusion
The Geek Vape L200 is a robust and versatile vaping device that caters to a wide range of users. By following this manual, you can set up, operate, and maintain your device effectively while ensuring your safety. Whether you are a seasoned vaper or just starting, the L200 offers a satisfying and enjoyable vaping experience that is hard to match. Always remember to vape responsibly and enjoy your journey in the world of vaping!
Frequently Asked Questions
What is the Geek Vape L200, and what are its main features?
The Geek Vape L200 is a portable vaping device known for its durability, featuring an IP68 rating for water and dust resistance. It has a 200W maximum output, dual 18650 battery support, and a large 2.4-inch color display for easy navigation.
How do I set up the Geek Vape L200 for the first time?
To set up the Geek Vape L200, first insert two fully charged 18650 batteries, ensuring correct polarity. Then, attach your preferred tank or RDA, fill it with e-liquid, and adjust the wattage according to your coil specifications before taking your first puff.
What safety features does the Geek Vape L200 include?
The Geek Vape L200 includes multiple safety features such as short circuit protection, overheat protection, and over-discharge protection to ensure a safe vaping experience.
How do I adjust the wattage on the Geek Vape L200?
To adjust the wattage on the Geek Vape L200, press the 'up' or 'down' buttons located on the device until you reach your desired wattage level. The current setting will be displayed on the screen.
Is the Geek Vape L200 compatible with other tanks?
Yes, the Geek Vape L200 is compatible with a variety of tanks and RDAs that use a standard 510 connection, allowing users to customize their vaping experience.
Where can I find the manual for the Geek Vape L200?
The manual for the Geek Vape L200 can typically be found on the official Geek Vape website under the support or downloads section. Additionally, it may be included in the product packaging.