Features of the Trophy Ridge React H5
The Trophy Ridge React H5 is packed with features designed to enhance accuracy and ease of use. Here are some of the key features:
- React Technology: Automatically adjusts the sight pins based on the distance to the target, providing precise yardage settings.
- Micro-Adjustable Pins: The sight comes with micro-adjustable pins that allow for fine-tuning to achieve optimal accuracy.
- Vertical and Horizontal Adjustments: The sight features both vertical and horizontal adjustment options for better customization.
- Durable Construction: Made from high-quality materials, the React H5 is designed to withstand harsh conditions without compromising performance.
- Easy-to-Read Sight Pins: The bright fiber optic pins ensure visibility in various lighting conditions.
Installation Instructions
Installing the Trophy Ridge React H5 requires careful attention to detail to ensure optimal performance. Follow these steps for a successful installation:
Tools Required
Before beginning the installation, gather the necessary tools:
- Phillips screwdriver
- Allen wrenches (included with the sight)
- Level
- Measuring tape
- Bow press (optional, but recommended for certain adjustments)
Step-by-Step Installation Process
- Remove the Old Sight: If you are replacing an existing sight, carefully remove it from your bow. Ensure that all screws and mounting hardware are taken off.
- Prepare the Bow: Clean the area where the new sight will be mounted. Ensure there are no obstructions and that the surface is smooth.
- Mount the React H5: Position the sight on the bow riser in your preferred location. Use the provided mounting hardware to secure the sight in place. Make sure it is tight but be careful not to overtighten.
- Align the Sight: Use a level to ensure the sight is perfectly horizontal. Making adjustments at this stage will save time later when sighting in.
- Attach the Sight Housing: If your React H5 has a detachable housing, attach it according to the manufacturer's instructions. Ensure it is securely fastened.
- Check for Stability: After mounting, check for any wobble or instability. If the sight is loose, re-tighten the screws and hardware.
Sighting In Your Trophy Ridge React H5
Once the sight is installed, the next step is to sight it in. This process ensures that your pins are accurately calibrated for specific distances.
Initial Setup
Before heading to the range, set up the following:
- A stable shooting platform
- Targets set at various distances (e.g., 20, 30, 40 yards)
- A rangefinder (optional but useful)
Sighting Process
- Start at 20 Yards: Position your target at 20 yards. Begin shooting with your lowest pin (typically the 20-yard pin). Adjust your aim based on where your arrows land.
- Make Adjustments: Use the micro-adjustable pins to move them up or down based on your shots. If your arrows are hitting high, lower the pin; if they are low, raise the pin.
- Move to Longer Distances: After confirming your 20-yard pin is accurate, move to 30 yards. Repeat the adjustment process for the 30-yard pin.
- Continue to 40 Yards: Follow the same steps for the 40-yard pin. Once all pins are adjusted, your sight should be ready for use.
Adjustments and Fine-Tuning
The Trophy Ridge React H5 allows for various adjustments to enhance your shooting experience. Here’s how to make those adjustments:
Vertical and Horizontal Adjustments
- Vertical Adjustment: Use the adjustment knob located on the rear of the sight to move the sight up or down. This is particularly useful if your arrows are consistently hitting above or below the target.
- Horizontal Adjustment: To adjust left or right, use the corresponding knob on the side of the sight. This will help you correct any lateral misalignment.
Pin Brightness Adjustments
If you find the pin brightness inadequate or too bright, you can adjust it using the following methods:
- Fiber Optic Exposure: Ensure the fiber optic pins are adequately exposed to light. If they are covered, the brightness may diminish.
- Pin Replacement: If the pins are damaged or not bright enough, consider replacing them with higher-quality or larger-diameter fibers.
Maintenance Tips
Proper maintenance of your Trophy Ridge React H5 will ensure its longevity and reliability. Here are some maintenance tips:
- Regular Cleaning: Clean the sight housing and pins regularly to remove dirt and debris that may affect performance.
- Inspect for Damage: Routinely check the sight for any signs of wear or damage. Look for loose screws, broken pins, or cracks in the housing.
- Store Properly: When not in use, store your bow and sight in a cool, dry place, away from direct sunlight. Use a bow case for added protection.
- Calibrate Annually: At least once a year, recalibrate your sight to ensure it maintains accuracy over time.
Troubleshooting Common Issues
Even with proper installation and maintenance, you may encounter issues with your Trophy Ridge React H5. Here are some common problems and solutions:
Issue: Inconsistent Shots
- Solution: Ensure all screws are tightened correctly and check your anchor point and form. If issues persist, re-sight your pins.
Issue: Pins Not Bright Enough
- Solution: Check for obstructions covering the fiber optic pins. If the pins are damaged, consider replacing them with new fibers.
Issue: Sight is Loose
- Solution: Inspect all mounting hardware and tighten as necessary. If the sight remains loose, consider using thread-locking compound for added security.
Conclusion
The Trophy Ridge React H5 is a sophisticated sight that enhances shooting performance for archers of all levels. By following the Trophy Ridge React H5 instructions outlined in this article, you can ensure proper installation, sighting, adjustments, and maintenance. With the right care, your React H5 will provide you with the accuracy and reliability you need for a successful shooting experience, whether in competition or the field. Embrace the technology and enjoy the precision that comes with the Trophy Ridge React H5!
Frequently Asked Questions
What are the basic steps to adjust the Trophy Ridge React H5 sight?
To adjust the Trophy Ridge React H5 sight, first ensure your bow is properly set up and the sight is mounted securely. Use the elevation and windage adjustment knobs to align your sight to the target. Start with close-range shots and make incremental adjustments based on your groupings.
How do I calibrate the React technology on the Trophy Ridge React H5?
To calibrate the React technology, shoot at a known distance (typically 20 yards) and adjust the sight until your arrow impacts the target where you aim. Then, the React technology will automatically adjust your 30-yard pin based on the 20-yard setting.
What maintenance does the Trophy Ridge React H5 sight require?
Regularly check the screws for tightness, clean the lenses, and inspect the sight for any wear or damage. It's also advisable to verify the settings before each use to ensure optimal performance.
Can the Trophy Ridge React H5 sight be used for both right and left-handed bows?
Yes, the Trophy Ridge React H5 sight can be adjusted for both right and left-handed bows. Simply follow the instructions in the manual to switch the orientation as needed.
How do I install the Trophy Ridge React H5 sight on my bow?
To install the Trophy Ridge React H5 sight, align the sight mount with the holes on the riser of your bow, secure it using the provided screws, and make sure it is level before tightening completely.
What should I do if my pins on the React H5 sight are not lining up correctly?
If your pins are not lining up, check to ensure that the sight is mounted securely and that the adjustments are functioning properly. You may need to recalibrate the React technology or adjust the individual pins manually.
